{"product_id":"tascam-ml-32d-32ch-analog-dante-converter","title":"TASCAM ML-32D 32ch Analog\/dante Converter","description":"\u003cp\u003eProduct  Information: The TASCAM ML-32D is a professional  Dante-focused converter made specifically to insert or extract  analog audio into or out of a Dante (Digital Audio Network Through  Ethernet) network using external breakout devices that utilize Sub-D  format connectors.  A powerful and flexible solution, the TASCAM ML-32D has 4 D-Sub  inputs and 4 D-Sub outputs, which can easily be connected to any of  the many devices that utilize D-Sub connectors such as microphone  preamplifiers, large and small format console mixers, audio  interfaces, amplifiers, and euro block connector devices. This  simple, yet elegant, solution enables audio to be quickly and easily  inserted into - or extracted from - the Dante audio stream.  About Dante: The Dante protocol was developed to provide uncompressed,  multi-channel, low-latency digital audio over a standard Ethernet  network aupporting as many as 1024 channels of 32b bit\/192kHz audio  over an existing CAT 5\/6 Ethernet system.  Since inception, Dante has seen steady adoption by a growing number  of systems integrators, especially those specializing in AVB (Audio  Video Bridging). In addition, Dante continues to gain a foothold in  the live sound arena, with hundreds of hardware products from  various manufacturers supporting this innovative communications  protocol. These live sound applications include: House of Worship  (HOW), institutional installations, theaters, audio for stadiums and  other public facilities and broadcast.  Primary and Secondary network connections redundancy and security Primary and secondary connectors enable building a redundant system  with a duplex network. Should the primary network route fails the  ML-32D automatically switches to the secondary network route. This  highly secure system prevents interruption and introduces no noise  during the switch.  Dante Controller  The TASCAM ML-16D uses Dante Controller to configure the main unit  and to connect to other Dante-compatible devices. Dante Controller  enables flexible routing configuration to other Dante-compatible  devices.  The front panel is equipped with a signal\/overload indicator that  enables monitoring of analog input\/output signals. The signal  indicator turns on when a signal level becomes lower than -60dBFs.  5 selectable reference levels which can accommodate to a variety of  scenes The TASCAM ML-32D features selectable reference level setting from 5  maximum level options: +24dBu, +22dBu, +20dBu, and +18dBu (the  standard level is +4dBu) and +15dBu (the standard level is +6dBu),  which can accommodate to a variety of purposes including  professional use in broadcasting studios, public address systems and  recording environments.    Specifications: ŸDante focused interface for connection of  external audio into or out of a Dante audio network Ÿ32 channel analog line input and 32 analog line outputs (48kHz\/96kHz) using 8  D-Sub connectors ŸDual redundant Ethernet jacks which support both primary and secondary  connections ŸUp to 24 bit\/96kHz quality ŸLED display for signal level and overload per input\/output channel ŸReference level dip switches for selectable DBu level metering ŸFirmware updatable via Dante port ŸAES67 and Ravenna compatible  Formats 44.1\/48 kHz, 16\/24 bit  88.2\/96 kHz, 16\/24 bit  Input\/output ratings PRIMARY\/SECONDARY connectors  Connector: RJ-45  Transmission protocol: Dante  Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)  Cables: category 5e or faster STP cables  ANALOG OUTPUT connectors Connector: D-sub 25-pin  Locking screws: No. 4-40 UNC (inch type)  Nominal output levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)  Maximum output levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF.  LEVEL switches)  Output impedance: 200 ? or lower  Applicable load impedance: 2 k? or higher  ANALOG INPUT connectors Connector: D-sub 25-pin  Locking screws: No. 4-40 UNC (inch type)  Nominal input levels: +4 dBu, +6 dBu (only when maximum input level is +15 dBu)  Maximum input levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF.  LEVEL switches)  Input impedance: 10 k? or higher  * 0 dBu=0.775 Vrms   Audio performance ANALOG IN to DANTE OUT  Frequency response: +0.1 dB\/-0.5 dB: 20 Hz\/20 kHz (-16 dBFS input, 44.1\/48 kHz  sampling frequency, JEITA), +0.1 dB\/-0.5 dB: 20 Hz\/40 kHz (-16 dBFS input,  88.2\/96 kHz sampling frequency, JEITA)  Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1\/48\/88.2\/96 kHz  sampling frequency, JEITA)  S\/N ratio: 113 dB or higher (44.1\/48\/88.2\/96 kHz sampling frequency, JEITA)  Crosstalk: 115 dB or higher (1 kHz, 44.1\/48\/88.2\/96 kHz sampling frequency,  JEITA)  DANTE IN to ANALOG OUT Frequency response: +0.1 dB\/-0.5 dB: 20 Hz\/20 kHz (-16 dBFS input, 44.1\/48 kHz  sampling frequency, JEITA), +0.1 dB\/-1.0 dB: 20 Hz\/40 kHz (-16 dBFS input,  88.2\/96 kHz sampling frequency, JEITA)  Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1\/48\/88.2\/96 kHz  sampling frequency, JEITA)  S\/N ratio: 110 dB or higher (44.1\/48\/88.2\/96 kHz sampling frequency, JEITA)  Crosstalk: 115 dB or higher (1 kHz, 44.1\/48\/88.2\/96 kHz sampling frequency,  JEITA)  Other Power: AC100-240 V, 50\/60 Hz  Power consumption: 22W  Dimensions: 483 × 45 × 303.8 mm (width x height x depth)  Weight: 3.5 kg  Operating temperature range: 0–40º  Included items: Main unit x1, Power cord x1, Rackmount screw kit x1, Owner’s  Manual (this document) including warranty x1\u003c\/p\u003e","brand":"Tascam","offers":[{"title":"Default Title","offer_id":51900134621469,"sku":"ML-32DCMI","price":4697.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0998\/2092\/9309\/files\/ML-32DCMI.jpg?v=1782117604","url":"https:\/\/scarlettmusic.com.au\/products\/tascam-ml-32d-32ch-analog-dante-converter","provider":"Scarlett Music","version":"1.0","type":"link"}