Nady PM-200A Powered Personal Near-Field Stage Monitor (150W)

The Nady PM-200A Powered Personal Stage Monitor is the perfect tool for monitoring audio on stage or in rehearsal. This unit puts the controls at your fingertips so you’ll never have to scream for "More Monitors!" again.

The speaker system is tailor-made to reduce fee back while allowing vocals and instruments to stand out in the mix. Simply input a line level feed from the main or monitor mixer and adjust the EQ’s and Volume to your personal liking. Or, you can input your instrument/vocal signal directly, before outputting to the main PA, to hear yourself solo.

With added features like Headphone outputs, Line outputs, and External Speaker outputs, there are any number of PM-200A configuratins to suit your special needs. You’ll hear yourself loud and clear and never miss the bridge again with the PM-200A by your side!

FEATURES:

Designed to reduce stage clutter and volume by putting the sound where you can most use it, the compact, rugged, lightweight PM-200A can be mounted on a mic stand (with optional mic stand mount adapter if needed), set on a keyboard, amp, or table for effective up-close monitoring, or as a stage monitor with 4 different angled positions for optimum placement and versatility.

Powerful internal 150W RMS amp can power internal speakers plus up to four PM-100 Personal Stage Monitors using the two External Speaker outputs.

Specially designed dual ferro-fluid5” drivers offer superior gain and optimum intelligibility at key vocal/instrument frequencies with ultimate feedback rejection. Maximum 125dB maximum SPL cuts through even the loudest ambient noise clutter.

Balanced 1/4" TRS and XLR input jacks (can be used simultaneously if desired), Volume control, 3-band EQ controls (High, Mid, Bass), front bafflePower On and Clipping LED indicators.

High powered Headphone Output and convenient 1/4" balanced Line Output for daisy chaining with other PM-200A, or connecting to mixers and PA’s.

Amplifier’s integrated low-noise/distortion Mosfet outputs offer thermal, short circuit, and antithump on/off protection. Externally selectable 115VAC or 230VAC operation.

SPECIFICATIONS:

Mic Input: Balanced XLR

Input Impedance: 2K?

Maximum Input: -10.2dBm (235mV)

Sensitivity (for max output with Volume max): -40dBm (7.5mV)

Line Input: Balanced/unbalanced TRS 1/4"

Input Impedance: 20K? (10K? unbalanced)

Maximum Input: +22dBm (10V)

Sensitivity (for max output with Volume max) -10dBm (230mV)

Line Output: Balanced XLR

Output Impedance: 1.4K?

Maximum Output (w/10K load): 15.5dBm (4.3V)

EQ and Volume: Rotary Knobs

High: +/-12dB @ 10K Hz

Mid: +/-12dB @ 2.5K Hz

Bass: +/-12dB @ 120 Hz

Headphone Output: 1/4" TRS Stereo

Power 2 x 80mW @ 32?

Power Amp Output: 2 internal speakers, 2 external 1/4" outputs

Power: 2 x 50W RMS @ 8? (Total 100W RMS). 2 x 75W RMS @ 4? (Total 150W RMS)

Frequency Response: 20Hz – 50KHz

THD: 0.055%

S/N: -81dB

Noise Floor: .200uV

Amplifier Protection: Clipping LEDs, thermal runaway, short circuit, anti-thump on/off protection

Internal Speakers: 5" full-range

Impedance: 8 ?

Voice Coil diameter: 1"

Power Requirements: Selectable, 115VAC/60Hz or 230VAC/50Hz

Fuse Requirements: 5 x 20mm glass tube F.B.

6A 250V @ 115VAC

3A 250V @ 230VAC

Weight: 9.6 lbs. (4.4 Kg)

Dimensions (H x W x D): 11.1" x 7" x 6.1" (28 x 18 x 15.5 cm)